Intermec 6400 User Manual page 51

SECTION 2
Navigate through the menus and ensure that
2.4 GHz OpenAir radio: your 6400 computer has the
"
same LAN ID and security ID as the access point.
802.11 DS radio: your 6400 computer has the same
"
network name as the 21XX UAP.
the IP addresses for the 6400 computer and subnet
"
mask are properly set.
the IP addresses for the router and domain server are
"
properly set (if applicable).
the DHCP client and SNMP agent are enabled or
"
disabled as appropriate.
To check 6400 TCP/IP client settings in your 6400
computer's configuration files, do the following:
Use a text editor to open PCTCP.INI. Ensure the
"
following parameters are properly set:
ip–address=
subnet–mask=
router= (if applicable)
domain–name–server= (if applicable)
Use a text editor to open NET.CFG.
"
2.4 GHz OpenAir radio: Ensure your computer has
the same LAN ID and security ID as the access point.
Note that in NET.CFG, the LAN ID is called
DOMAIN.
802.11 DS radio: Ensure your computer has the same
network name as the 21XX UAP.
6400 Computer TCP/IP Client User's Guide
6400 TCP/IP Client
2-25