Intermec 6400 User Manual page 61

SECTION 2
-d# [bytes]
-e
host
-i value
-j dest1 ... destn
-k dest1 ... destn
-l length
Displays header and debugging information
about the outgoing packet. Use bytes to
specify the number of bytes to display in
hexadecimal notation. If you specify -t with
the -d# option, the program repeatedly con
tacts the target host and displays the first
output packet along with a changing display
of the number of echoes. If you specify both
the -d# and -d options, ping displays infor
mation for the outgoing packet first.
Cancels any configured IP extended security
levels or authority that ping would
otherwise insert.
Specifies the name or Internet address of
the remote host.
Sets IP Time to Live (TTL) value on the
outgoing packet and displays TTL value for
the incoming packet. The range is 1-255.
Default: 64.
Turns on the IP Loose Source Routing
option, which lets the packet pass through
unlisted routers between destinations. Each
destination is the IP address of a router
through which the packet must pass on the
way to the final destination. The -j option
cannot be used with the -k option.
Turns on the IP Strict Source Routing
option, which does not let the packet pass
through unlisted routers between
destinations. Each destination is the IP
address of a router through which the
packet must pass on the way to the final
destination. The -k option cannot be used
with the -j option.
Sets the length in bytes of data in a packet.
Default: 256. You can use this option to
send longer packets through the network if
the transport to which your 6400 computer
is connected supports a data length greater
than 256 bytes.
6400 Computer TCP/IP Client User's Guide
6400 TCP/IP Client
2-35