Setting Vibrate Mode - Intermec CN3 User Manual

Setting Vibrate Mode

CN3 Mobile Computer User's Manual
To set your CN3 to vibrate
• Tap the Volume icon at the top of the screen, then tap Vibrate. If your
CN3 has a built-in phone, this sets both the volume and the phone to
vibrate. Note the icon change.
To set your CN3 to vibrate using the Intermec Settings applet
1 Tap Start > Settings > the System tab > the Intermec Settings icon.
2 Tap (+) to expand Device Settings > Beeper > Vibrate, then tap
Vibrate.
3 To disable the vibrate, tap the Beeper option.
Chapter 1 — Using the Computer
25