Chapter 4 Setup Menus; Basic Setup Menu - Satec C191HM Installation And Operation Manual

Chapter 4 Setup Menus

4. CHAPTER 3 SETUP MENUS
NOTE: Instrument setup can be performed directly on the front panel using the setup
menus or via communications using PComTest communication software. PComTest is
supplied with your instrument and provides full setup capabilities for your instrument. For
information on using PComTest, refer to the user documentation supplied with your
instrument.
Setup
Basic
Communication port
User Selectable options
Analog output
Digital inputs
Alarm/Event set points
Pulsing output
Pulse counter
Assignable registers
Display

4.1 Basic Setup Menu

SELECT
This menu contains the basic configuration options which define the general
operating characteristics of your instrument, such as wiring mode, input scales,
the size of the RMS averaging buffer, etc. Table 4-1 lists the basic setup options,
their code names and applicable ranges.
Activate the middle window to scroll through the list of available options, and
then activate the lower window to set the option value.
To select and view a setup option:
bASc
Press SELECT
ConF
Use the up/down arrow keys to scroll to the desired option. The current
4L-n
value for this option appears in the lower window.
To change the value of the selected option:
Press SELECT
Press the up/down arrow keys to scroll to the desired value.
ENTER
Press
setup menu.
20
Display
+
++
++
+
+
+
+
+
-
++
CHG
ENTER
to activate the middle window
to make the lower window active.
to store the selected value, or press
PComTest
+
+
+
+
+ ++ Recommended method
+
+
+
++
-
bASc
ENTER
ESC
Chapter 4 Setup Menus
to quit the