Enabling The Lorawan And Network Server; Figure 4.1 Customization > User Modules; Figure 4.2 Lorawan Gateway > Mqtt And Lorawan - Advantech WISE-6610 Series User Manual

4.1

Enabling the LoRaWAN and Network Server

1. Login WISE-6610 Series. See "Access Interface" on page 14.
2. Go to Customization > User Modules.
3. A list of available devices display. Click on the target LoRaWAN Gateway.
4. The Settings menu displays. In LoRaWAN Radio Enable, click the drop-down
menu to enable LoRaWAN function.
5. Configure the main frequency for radio 0 and radio 1. For radio 1, there are eight
channels and one standard channel.
Note! 1.
2.
3. In LoRaWAN Gateway Identifier, copy the gateway ID and set on LoRaWAN
network server.
Figure 4.2 LoRaWAN Gateway > MQTT and LoRaWAN
WISE-6610 Series User Manual
Figure 4.1 Customization > User Modules
The offset setting for the eight channels must be +/-500KHz.
Use Quick Setup to define the main frequency for receiving the
data from the LoRaWAN node.
69