Network Setting; Serial Setting - Advantech EKI-1242PNMS Quick Manual

2 Network Setting

The IP Settings menu allows you to select a static address or DHCP network
configuration. The Static address displays the configurable settings for the static
option.
To access this page, click Network Setting > IP Setting
Note: The gateway needs to be restarted before any changes will take effect.

3 Serial Setting

The Serial Setting allows for the configuration of the serial interface type, baud
rate, parity, data/stop bits, and flow control for port configuration.
To access this page, click Serial Setting > Port
Parameter
Type
Baud Rate
Parity
Data Bits
Stop Bits
Flow Control
Click the drop-down menu to select a serial interface: RS-232
RS-422 or RS-485.
Enter a value to specify the baud rate. The value should conform
to the current transmission speeds of connected devices when
setting the baud rate
Click the drop-down menu to select the parity: None, Odd, Even,
Mark or Space
Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Click the drop-down menu to select the flow control mode:
Description