Customization; Adding A Module; Figure 3.48 Example Of Automatic Update 1; Figure 3.49 Example Of Automatic Update 2 - Advantech WISE-6610 Series User Manual

Example 1: Automatic Update
In the following example the device checks for new firmware or configuration file
each day at 1:00 a.m. An example is given for the WISE-6610 Series device.

Firmware file: http://example.com/SPECTRE-v3L-LTE.bin

Configuration file:http://example.com/test.cfg
Example 2: Automatic Update Based on MAC
In the following example the device checks for new firmware or configuration each
day at 1:00 a.m. An example is given for the WISE-6610 Series device with MAC
address 00:11:22:33:44:55.

Firmware file: http://example.com/SPECTRE-v3L-LTE.bin

Configuration file: http://example.com/00.11.22.33.44.55.cfg
3.5

Customization

3.5.1

Adding a Module

You may run custom software programs in the device to enhance the features of the
device. Use the User Modules menu item to add new software modules to the device,
to remove them, or to change their configuration. Use the Browse button to select
the user module (compiled module has tgz extension). Use the Add button to add a
user module.
To access this page, click User Modules (located under Customization).
The new module appears in the list of modules on the same page. If the module
contains an index.html or index.cgi page, the module name serves as a link to this
page. The module can be deleted using the Delete button.
Updating a module is done the same way. Click the Add button and the module with
the higher (newer) version will replace the existing module.

Figure 3.48 Example of Automatic Update 1

Figure 3.49 Example of Automatic Update 2

56 WISE-6610 Series User Manual