Ipsec - Advantech WISE-6610 Series User Manual

Configuration
Remote IP Address
Remote Subnet
Remote Subnet Mask
Local Interface IP Address
Remote Interface IP Address
Compression
Authenticate mode
Examples of different options for configuration and authentication of OpenVPN tunnel
can be found in the application note OpenVPN Tunnel [5].
3.4.4

IPSec

To open the Tunnel Configuration page, click in the Configuration section of the main
menu. The tunnel function allows you to create a secured connection between two
separate LAN networks. The device allows you to create up to four tunnels. IPv4 and
IPv6 tunnels are supported (dual stack), you can transport IPv6 traffic through IPv4
tunnel and vice versa.
To access this page, click Configuration > IPSec.
Note! To encrypt data between the local and remote subnets, specify the
appropriate values in the subnet fields on both devices. To encrypt the
data stream between the devices only, leave the local and remote
subnets fields blank.
Note! If you specify the protocol and port information in the Local Protocol/Port
field, then the device encapsulates only the packets matching the
settings.
WISE-6610 Series User Manual
A
10.0.0.2
192.168.2.0
255.255.255.0
19.16.1.0
19.16.2.0
LZO
none
35
B
10.0.0.1
192.168.1.0
255.255.255.0
19.16.2.0
19.16.1.0
LZO
none