Table of Contents
Advertisement
10.
In the Create new gateway page, configure the new gateway settings. Input the
MAC which is the LoRaWAN gateway ID shows on the LoRaWAN setting Page.
Figure 4.6 LoRaWAN Server > Infrastructure > Gateways > Create
Item
Description
MAC
Enter the LoRaWAN gateway ID shown on MQTT and LoRaWAN
menu.
Group
Enter the opaque string with application-specific settings.
TX Chain
Enter a value to identify the radio chain used for downlinks (default:
0). It shall correspond to a radio_x (e.g. radio_0) with
tx_enable: true in gateway's global_conf.json.
Antenna Gain (dBi)
Enter a value to ensure the TX Power + Antenna Gain is below the
maximal allowed Equivalent Isotropic Radiated Power (EIRP) for the
given Network.
Description
Enter the description for the gateway.
Submit
Click Submit to save the values and update the screen.
11.
Click Infrastructure > Networks to enter the Networks List page.
By default, the WISE-6610 Series pre-configures the network to support EU868,
AU915, AS923 and US902.
Figure 4.7 LoRaWAN Server > Infrastructure > Networks
72
WISE-6610 Series User Manual
Advertisement
Table of Contents
