Figure 3.37 Example Of Ntp Configuration; Figure 3.38 Configuration > Services > Snmp - Advantech WISE-6610 Series User Manual

The figure below displays an example of a NTP configuration with the primary server
set to ntp.cesnet.cz and the secondary server set to tik.cesnet.cz and with the
automatic change for daylight saving time enabled.
3.4.8.4 SNMP
The SNMP page allows you to configure the SNMP v1/v2 or v3 agent which sends
information about the device (and its expansion ports) to a management station. To
open the SNMP page, click SNMP in the Configuration section of the main menu.
SNMP (Simple Network Management Protocol) provides status information about the
network elements such as devices or endpoint computers. In the version v3, the
communication is secured (encrypted). To enable the SNMP service, mark the
Enable the SNMP agent check box. Sending SNMP traps to IPv6 address is
supported.
To access this page, click Configuration > Services > SNMP.
Item
Name
WISE-6610 Series User Manual

Figure 3.37 Example of NTP Configuration

Figure 3.38 Configuration > Services > SNMP
Description
Designation of the device.
47