Change Profile; Change Password; Figure 3.57 Administration > Change Profile; Figure 3.58 Administration > Change Password - Advantech WISE-6610 Series User Manual

3.6.2

Change Profile

In addition to the standard profile, up to three alternate device configurations or
profiles can be stored in device's non-volatile memory. You can save the current
configuration to a device profile through the Change Profile menu item. Select the
alternate profile to store the settings to and ensure that the Copy settings from
current profile to selected profile box is checked. The current settings will be stored in
the alternate profile after the Apply button is pressed. Any changes will take effect
after restarting device through the Reboot menu in the web administrator or using an
SMS message.
To access this page, click Administration > Change Profile.
Example: Using Profiles
Profiles can be used to switch between different modes of operation of the device
such as PPP connection, VPN tunnels, etc. It is then possible to switch between
these settings using the front panel binary input, an SMS message, or Web interface
of the device.
3.6.3

Change Password

Use the Change Password configuration form in the Administration section of the
main menu for changing your password used to log on the device. Enter the new
password in the New Password field, confirm the password using the Confirm
Password field, and press the Apply button.
To access this page, click Administration > Change Password.
Warning! The default password of the device is root for the root user. To maintain
the security of your network change the default password. You can not
enable remote access to the device for example, in NAT, until you
change the password.
Figure 3.57 Administration > Change Profile
Figure 3.58 Administration > Change Password
64 WISE-6610 Series User Manual