Advantech WISE-6610 Series User Manual page 59

Item Description
Location Location of where you installed the device.
Contact Person who manages the device together with information how to
contact this person.
To enable the SNMPv1/v2 function, mark the Enable SNMPv1/v2 access check box.
It is also necessary to specify a password for access to the Community SNMP agent.
The default setting is public.
You can define a different password for the Read community (read only) and the
Write community (read and write) for SNMPv1/v2. You can also define 2 SNMP users
for SNMPv3. You can define a user as read only (Read), and another as read and
write (Write). The device allows you to configure the parameters in the following table
for every user separately. The device uses the parameters for SNMP access only.
To enable the SNMPv3 function, mark the Enable SNMPv3 access check box, then
specify the following parameters:
Item Description
Username User name
Authentication Encryption algorithm on the Authentication Protocol that is used to
verify the identity of the users.
Authentication Password used to generate the key used for authentication.
Password
Privacy Encryption algorithm on the Privacy Protocol that is used to ensure
confidentiality of data.
Privacy Password Password for encryption on the Privacy Protocol.
Activating the Enable I/O extension function allows you monitor the binary I/O inputs
on the device.
Selecting Enable M-BUS extension and entering the Baudrate, Parity and Stop Bits
lets you monitor the meter status connected to the expansion port MBUS status.
Selecting Enable reporting to supervisory system and entering the IP Address and
Period lets you send statistical information to the monitoring system, R-SeeNet.
Item Description
IP Address IPv4 or IPv6 address.
Period Period of sending statistical information (in minutes).
Each monitored value is uniquely identified using a numerical identifier OID - Object
Identifier. This identifier consists of a progression of numbers separated by a point.
The shape of each OID is determined by the identifier value of the parent element
and then this value is complemented by a point and current number. So it is obvious
48 WISE-6610 Series User Manual