Advantech WISE-6610 Series User Manual page 40

If you require more than sixteen NAT rules, insert the remaining rules into the Startup
Script. The Startup Script dialog is located on Scripts page in the Configuration sec-
tion of the menu. When creating your rules in the Startup Script, use this command
for IPv4 NAT:
iptables -t nat -A napt -p tcp -dport [PORT_PUBLIC] -j DNAT
-to-destination [IPADDR]:[PORT_PRIVATE]
Enter the IP address [IPADDR], the public ports numbers [PORT_PUBLIC], and pri-
vate [PORT_PRIVATE] in place of square brackets. For IPv6 NAT use ip6tables com-
mand with same options.
If you enable the following options and enter the port number, the router allows you to
remotely access to the router from WAN (Mobile WAN) interface.
Caution! Enable remote HTTP access on port activates the redirect from HTTP to
HTTPS protocol only. The router doesn't allow unsecured HTTP proto-
col to access the web configuration. To access the web configuration,
always check the Enable re- mote HTTPS access on port item. Never
enable the HTTP item only to access the web configuration from the
Internet (configuration would not be accessible from the Internet).
Always check the HTTPS item or HTTPS and HTTP items together (to
set the redirect from HTTP).
Item
Enable remote HTTP
access on port
Enable remote
HTTPS access on
port
Enable remote SSH
access on port
Enable remote
SNMP access on
port
Masquerade
outgoing packets
Use the following parameters to set the routing of incoming data from the WAN
(Mobile WAN) to a connected computer.
Item
Send all remaining
incoming packets to
default server
Default Server IP
Address
WISE-6610 Series User Manual
Description
This option sets the redirect from HTTP to HTTPS only (disabled in
default configuration).
If field and port number are filled in, configuration of the router over
web interface is allowed (disabled in default configuration).
Select this option to allow access to the router using SSH (disabled in
default configuration).
Select this option to allow access to the router using SNMP (disabled
in default configuration).
Activates/deactivates the network address translation function.
Description
Activates/deactivates forwarding unmatched incoming packets to the
default server. The prerequisite for the function is that you specify a
default server in the De- fault Server IPv4/IPv6 Address field. The
router can for- ward incoming data from a GPRS to a computer with
the assigned IP address.
The IP address.
29