Table of Contents
Advertisement
Programming and compiling of modules is described in the Application Note
Programming of User Modules [10].
Item
MODBUS TCP2RTU Provides a conversion of MODBUS TCP/IP protocol to MDBUS RTU
Easy VPN client
NMAP
Daily Reboot
HTTP Authentication Adds the process of authentication to a server that doesn't provide
HTTP Authentication Adds support of dynamic protocols.
PIM SM
WMBUS
Concentrator
pduSMS
GPS
Pinger
IS-IS
Note!
In some cases the firmware update can cause incompatibility with
installed user modules. Some of them are dependent on the version of
the Linux kernel (for example SmsBE and PoS Configuration). It is best
to update user modules to the most recent version.
Information about the user module and the firmware compatibility is at the beginning
of the user module's Application Note.
WISE-6610 Series User Manual
Figure 3.50 User Modules
Description
protocol, which can be operated on the serial line.
Provides secure connection of LAN network behind our device with
LAN network behind CISCO device.
Enables TCP and UDP scan.
Enables daily reboot of the device at the specified time.
this service.
Adds support of multicast routing protocol PIM-SM.
Enable the reception of messages from WMBUS meters and saves
contents of these messages to an XML file.
Sends short messages (SMS) to specified number.
Allows the device to provide location and time information in all
weather, anywhere on or near the Earth, where there is an
unobstructed line of sight to four or more GPS satellites.
Allows you to manually or automatically verify the functionality of the
connection between two network interfaces (ping).
Adds support of IS-IS protocol.
57
Advertisement
Table of Contents
