Set Real Time Clock; Backup Configuration; Restore Configuration; Figure 3.59 Administration > Set Real Time Clock - Advantech WISE-6610 Series User Manual

3.6.4

Set Real Time Clock

You can set the internal clock directly using the Set Real Time Clock dialog in the
Administration section of in the main menu. You can set the Date and Time manually.
When entering the values manually use the format yyyy-mm-dd as seen in the figure
below. You can also adjust the clock using the specified NTP server. IPv4, IPv6
address or domain name is supported. After you enter the appropriate values, click
the Apply button.
To access this page, click Administration > Set Real Time Clock.
3.6.5

Backup Configuration

You can save the configuration of the device using the Backup Configuration
function. If you click on Backup Configuration in the Administration section of the
main menu, then the device allows you to select a directory in which the device saves
the configuration file.
3.6.6

Restore Configuration

You can restore a configuration of the device using the Restore Configuration form.
To navigate to the directory containing the configuration file (.cfg) you wish to load on
the device, use the Browse button.
To access this page, click Administration > Restore Configuration.
WISE-6610 Series User Manual
Figure 3.59 Administration > Set Real Time Clock
Figure 3.60 Administration > Restore Configuration
65