Table of Contents
Advertisement
CONFIGURING BB-MESP211T ON NETWORK WITHOUT A DHCP SERVER
Your Modbus Gateway comes from the factory set to receive an IP assignment from a DHCP Server. If there is not a
DHCP server on your network, the Modbus Gateway will default to IP address 169.254.102.39. If this address does
not work with your PC, there are two methods to manually configure the network information.
1. Method 1: Change your PC Network to Match the Modbus Gateway
a.
Open your network connection.
Click on Internet Protocol (TCP/IP) and click Properties. Change the parameters to the
following:
IP Address = 169.254.102.1
Subnet Mask = 255.255.0.0
Default Gateway = 169.254.102.100
Modbus Gateway – BB-MESP211T
37
Advertisement
Table of Contents
