Network Setting; Ip Setting; Figure 3.12 Network Setting > Ip Setting - Advantech EKI-1242 Series User Manual

3.3

Network Setting

3.3.1

IP Setting

The IP Setting menu allows you to select a static or DHCP network configuration.
The Static displays the configurable settings for the static option.
To access this page, click Network Setting > IP Setting.
The following figure displays the menu as found in the EKI-1242BNMS/EKI-
1242IBNMS.
The following table describes the items in the previous figure.
Item
Modbus/TCP IP Address Setting
Mode
IP Address
Subnet Mask
Gateway
Modbus/TCP and
BACnet/IP interface
use the same IP
address setting
Figure 3.12 Network Setting > IP Setting
Description
Click the drop-down menu to select the IP address setting mode:
Static address, or DHCP client.
Enter a value to specify the IP address of the interface. The default is
192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Check the option to use same IP address setting on Modbus/TCP and
BACnet/IP interface. In this mode, the BACnet ports of Modbus/TCP
and BACnet/IP are bridged, so the traffic can be forwarded between
these interfaces.
Unchecked the option to use two different IP subnet on Modbus/TCP
and BACnet/IP interface. In this mode, the BACnet ports of Modbus/
TCP and BACnet/IP are not bridged, so the traffic can't be forwarded
between these interfaces.
37 EKI-1242 Series User Manual