2.3.3
DIN Rain Mounting
2.3.3.1
Installing the DIN Rail Mounting Kit
1.
Align the DIN rail clip with the rear of SmartSwarm.
2.
Secure the DIN rail clip and the SmartSwarm with screws.
3.
Position the rear panel of the SmartSwarm directly in front of the DIN rail, mak-
ing sure that the top of the DIN rail clip hooks over the top of the DIN rail, as
shown in the following illustration.
Make sure the DIN rail is inserted behind the spring mechanism.
4.
Once the DIN rail is seated correctly in the DIN rail clip, press the front of the
SmartSwarm to rotate the SmartSwarm down and into the release tab on the
DIN rail clip. If seated correctly, the bottom of the DIN rail should be fully
inserted in the release tab.
Figure 2.4 Wall Mount Installation
Figure 2.5 Installing the DIN-Rail Mounting Kit
10
DIN rail clip
DIN rail
DIN rail clip
release tab
WISE-6610 Series User Manual