2.3.2
Wall Mounting
1.
Locate the area to install and mark the four screw locations. It is suggested to
place the device on the installation location and use the mounting locations to
mark the location of the screw holes).
2.
If necessary first drill pilot holes. Drill four holes over the four marked locations
on the wall. On concrete, it is recommended to install wall sinks
3.
Align the SmartSwarm over the installation location on the wall.
4.
Secure the SmartSwarm with screws (Ø 5.0 mm).
WISE-6610 Series User Manual
Figure 2.3 Wall Mount Installation
9