Figure 3.27 Configuration > Gre > 1St Tunnel - Advantech WISE-6610 Series User Manual

connection between two separate LAN networks. The device allows you to create
four GRE tunnels.
To access this page, click Configuration > GRE.
Figure 3.27 Configuration > GRE > 1st Tunnel
Item Description
Description Description of the GRE tunnel.
Remote IP Address IP address of the remote side of the tunnel.
Remote Subnet IP address of the network behind the remote side of the tunnel.
Remote Subnet Specifies the mask of the network behind the remote side of the
Mask tunnel.
Local Interface IP IP address of the local side of the tunnel.
Address
Remote Interface IP IP address of the remote side of the tunnel.
Address
Multicasts Activates/deactivates sending multicast into the GRE tunnel:


Pre-shared Key Specifies an optional value for the 32 bit shared key in numeric
format, with this key the device sends the filtered data through the
tunnel. Specify the same key on both devices, otherwise the device
drops received packets.
Note! The GRE tunnel does not pass through NAT.
The changes in settings will apply after pressing the Apply button.
disabled - Sending multicast into the tunnel is inactive.
enabled - Sending multicast into the tunnel is active.
40 WISE-6610 Series User Manual