Figure 3.42 Configuration > Services > Smtp; Figure 3.43 Smtp Client Configuration Example - Advantech WISE-6610 Series User Manual

The path to the objects is:
iso ? org ? dod ? internet ? private ? enterprises ? conel ? protocols
The path to information about the device is:
iso ? org ? dod ? internet ? mgmt ? mib-2 ? system
3.4.8.5 SMTP
Use the SMTP form to configure the Simple Mail Transfer Protocol client (SMTP) for
sending e-mails. IPv6 e-mail servers are supported.
To access this page, click Configuration > Services > SMTP.
Item
SMTP Server
Address
SMTP Port
Secure Method
Username
Password
Own Email Address
The mobile service provider can block other SMTP servers, then you can only use
the SMTP server of the service provider.
You can send e-mails from the Startup script. The Startup Script dialog is located in
Scripts in the Configuration section of the main menu. The device also allows you to
send e-mails using an SSH connection. Use the email command with the following
parameters:

-t: e-mail address of the receiver

-s: subject, enter the subject in quotation marks

-m: message, enter the subject in quotation marks

-a: attachment file
WISE-6610 Series User Manual
Figure 3.42 Configuration > Services > SMTP
Description
IPv4 address, IPv6 address or domain name of the mail server.
Port the SMTP server is listening on.
None, SSL/TLS, or STARTTLS. Secure method has to be supported
by the SMTP server.
Name for the e-mail account.
Password for the e-mail account. The password can contain the
following special characters * + , - . / : = ? ! # % [ ] _ { } ~
The following special characters are not allowed: " $ & ' ( ) ; < >
Address of the sender.

Figure 3.43 SMTP Client Configuration Example

51