Figure 2.6 Correctly Installed Din Rail Kit; Figure 2.7 Removing The Din-Rail - Advantech WISE-6610 Series User Manual

See the following figure demonstrating the correct position of a completed DIN
installation.
2.3.3.2 Removing the DIN Rail Mounting Kit
1. Ensure that power is removed from the SmartSwarm, and disconnect all cables
and connectors from the front panel of the SmartSwarm.
2. Push down on the top of the DIN rail clip release tab with your finger. As the clip
releases, lift the bottom of the SmartSwarm, as shown in the following illustra-
tion.
WISE-6610 Series User Manual

Figure 2.6 Correctly Installed DIN Rail Kit

Figure 2.7 Removing the DIN-Rail

11