Figure 2.15 Wall Mounting Screw Dimensions - Advantech EKI-1222 User Manual

10. To mount the wall plate, use screws of the size shown in the following illustra-
tion.

Figure 2.15 Wall Mounting Screw Dimensions


Note! Make sure the screws dimensions are suitable for use with the wall
mounting plate.

Do not completely tighten the screws into the wall. A final adjust-
ment may be needed before fully securing the wall mounting plates
on the wall.
11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it forward to lock in place,
see the following figure.
13. Once the device is installed on the wall, tighten the screws to secure the device.
8.0 mm
4.0 mm
2
1
2
Figure 2.16 Wall Mount Installation
19 EKI-122X Series User Manual