Wall-Mounting; Figure 2.4 Installing Wall Mount Plates - Advantech EKI-1242 Series User Manual

2.3.2

Wall-Mounting

The wall mounting option provides better shock and vibration resistance than the DIN
rail vertical mount.
Note! When installing, make sure to allow for enough space to properly install
the cabling.
Before the device can be mounted on a wall, you will need to remove the DIN rail
plate.
1. Rotate the device to the rear side and locate the DIN mounting plate.
2. Remove the screws securing the DIN mounting plate to the rear panel of the
fieldbus gateway.
3. Remove the DIN mounting plate. Store the DIN mounting plate and provided
screws for later use.
4. Remove the screws securing on the top and bottom of the device.
5. Align the wall mounting plates on the rear side. The screw holes on the device
and the mounting plates must be aligned, see the following illustration.
6. Secure the wall mount plates with the provided screws, see the following figure.
EKI-1242 Series User Manual

Figure 2.4 Installing Wall Mount Plates

18