Figure 2.10 Wall Mounting Screw Dimensions; Figure 2.11 Wall Mount Installation - Advantech EKI-1221IEIMB User Manual

10. To mount the wall plate, use screws of the size shown in the following illustra-
tion.

Note!

11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it forward to lock in place,
see the following figure.
13. Once the device is installed on the wall, tighten the screws to secure the device.
EKI-1221IEIMB | PNMB User Manual
8.0 mm
4.0 mm

Figure 2.10 Wall Mounting Screw Dimensions

Make sure the screws dimensions are suitable for use with the wall
mounting plate.
Do not completely tighten the screws into the wall. A final adjust-
ment may be needed before fully securing the wall mounting plates
on the wall.
1

Figure 2.11 Wall Mount Installation

13
2
2