Configure The Advanced Parameters Of The Wlan; Figure 4-4 Access Control-Mode Settings Page - Zte ZXHN H267N Management Manual

4.2.2 Configure the Advanced Parameters of the WLAN

The section describes how to configure
parameters of
Steps
1. On the main page of the ZXHN H267N, select Local Network > WLAN > WLAN
Advanced to go to the WLAN Advanced page.
Access Control-Mode Settings
2. Click Access Control-Mode Settings.
The page is shown in

Figure 4-4 Access Control-Mode Settings Page

3. Configure the
Table 4-3
Table 4-3 Access Control-Mode parameters
Parameter
No Filter
Back List
White List
4. Click Apply button to apply the changes.
Acess Control-Rule Settings
5. Click Acess Control-Rule Settings.
The page is shown in
SJ-20140702105807-002|2014-11-13 (R1.0)
WLAN Advanced configuration features.
Figure 4-4.
WLAN Global Configuration parameters.
lists the Acess Control-Rule setting parameters.
Figure 4-5.
Chapter 4 Configure the Local Network
WLAN Advanced. WLAN Advanced provides the
Description
No filter is to be applied (the default).
Deny LAN users to access specific address.
Allow LAN users to access specific address.
4-5
ZTE Proprietary and Confidential