Configure The Mirror; Figure 6-8 Mirror Configuration Page - Zte ZXHN H267N Management Manual

l Click Browse to select the user configuration file, and then click Restore Config-
uration to restore the device to the user configuration.
After the user configuration file is imported, the system will restart.
– End of Steps –

6.5 Configure the Mirror

This procedure introduces how to perform the mirror configuration.
If the mirror configuration is performed, the packets at the
specified
Steps
1. On the main page of the ZXHN H267N, select Management & Diagnosis > Mirror
Configuration to go to the Mirror Configuration page.
The page is shown in

Figure 6-8 Mirror Configuration Page

2. Configure the mirror parameters.
Table 6-3
Table 6-3 Parameter Descriptions for the Mirror Configuration
Parameter
Name
SJ-20140702105807-002|2014-11-13 (R1.0)
Note:
LAN interface, and it can be used for the network analysis and troubleshooting.
Figure
lists the Mirror Configuration parameters.
Description
The name of the Mirror Configuration.
Chapter 6 Configure the Management and Diagnosis
6-8.
6-7
WAN side will be copied to the
ZTE Proprietary and Confidential