Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zte ZXHN H185
Summary of Contents for Zte ZXHN H185
-
Page 2: User Manual
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their re- spective owners. This document is provided “as is”, and all express, implied, or statutory... -
Page 3: Safety Precautions
Safety Precautions Note: Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions � Read all the safety cautions carefully before using the device. �... -
Page 4: Product Specifications
Overview ZXHN H185 is a simple G.Fast Modem, which is backward compatible with VDSL2 up to Profile 35b. It provides High Speed Internet through the G.Fast uplink. 2.1 Features It supports the following features: �... -
Page 5: Package Check
V1.0.x (x can be 0 – 9) x represent different customization, and do not affect the product firmware and RF output power. 2.3 Package Check After unpacking the ZXHN H185 product, check that the following items are complete. Name Quantity... -
Page 6: System Requirement
Operating systems can be Windows XP or later. For system configuration in the WEB interface, the browser of Internet Explorer V 8.0 or later. Installation Preparation 3.1 Hardware Description Front panel Figure 3-1 shows the indicators on the front panel of the ZXHN H185. - Page 7 Figure 3-1 The Front Panel Table 3-1 describes the indicators on the front panel of the ZXHN H185 unit. Table 3-1 Descriptions of Indicators Status Description Indicator Solid green ZXHN H185 is powered on and works properly. Solid red ZXHN H185 is powered on but fails to work properly.
-
Page 8: Hardware Connection
Rear panel Figure 3-2 shows the interfaces and buttons on the back panel of the ZXHN H185. Figure 3-2 The Back Panel Table 3-2 describes the interfaces and buttons on the back panel of the ZXHN H185. Table 3-2 The Back Panel Interface/Button Function RJ-11 port: Used to connect to the G.Fast uplink access... -
Page 9: Troubleshooting
� All indicators are Off when the ZXHN H185 equipment is powered On. First make sure that you have inserted the power adapter of the ZXHN H185 into a working power socket and that the ZXHN H185 has been powered On (the switch button is pressed down). - Page 10 If the VDSL2 suddenly fails to be synchronized (link down) during application, usually the Link indicator on the ZXHN H185 will not be ON. It is suggested to check the following steps one by one: i.