Configure The 4In6 Tunnel Connection; Figure 3-8 Dsl Modulation Parameters - Zte ZXHN H267N Management Manual

Figure 3-8 DSL Modulation Parameters

8. Configure
Select the
l
Click All On to select all
l
Click All Off to cancel all
l
When you select the Bitswap check box, the system can adjust the modulation bit
of an interfered channel to the bit of other channels.
– End of Steps –

3.2.3 Configure the 4in6 Tunnel Connection

This page provides the parameters of 4in6 Tunnel configuration features.
Steps
1. On the main page of the ZXHN H267N, select Internet > WAN > 4in6 Tunnel to go to
the 4in6 Tunnel page, as shown in
SJ-20140702105807-002|2014-11-13 (R1.0)
DSL Modulation Parameters.
DSL modulation types and click Apply button to apply the changes.
Note:
DSL modulation types.
DSL modulation types.
Figure 3-9.
3-13
Chapter 3 Configure the Internet
ZTE Proprietary and Confidential