Figure 3-6 Route Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide

Figure 3-6 Route Page

Table 3-3
Table 3-3 Parameter Descriptions for the DSL
Parameter
Connection Name
xDSL Transfer Mode
VPI/VCI
Service Type
SJ-20140702105807-002|2014-11-13 (R1.0)
lists the New Item parameters.
Description
Name of the connection.
There are two xDSL transfer modes:
l ATM
l
PTM
In the case of IPv4_PPPoE, select PTM.
If xDSL Transfer ModeEnter is selected to be ATM,
the VPI/VCI values provided by the ISP needs to be
configured.
VPI Range: 0 - 255.
VCI Range: 0 - 65535.
If xDSL Transfer ModeEnter is selected to be ATM,
Service Type needs to be configured.
ATM QoS used to limit the transmission of uplink traffic.
The options are: CBR, RT-VBR, nRT-VBR, and UBR.
3-8
ZTE Proprietary and Confidential