Configure The Dns; Figure 4-25 Dms Configuration Page - Zte ZXHN H267N Management Manual

Steps
1. On the main page of the ZXHN H267N, select Local Network > DMS to go to the
DMS page.
The page is shown in

Figure 4-25 DMS Configuration Page

2. Set the parameters. For a description of the parameters, refer to
Table 4-17 Parameter Descriptions for the DMS
Parameter
DMS Switch
DMS Name
Library Rescan
Method
Media Source1–
Media Source4
3. Click Apply button to apply the changes.
– End of Steps –

4.8 Configure the DNS

The section describes how to configure DNS.
The relevant information of Internet status includes Domain name, Host Name and DNS.
SJ-20140702105807-002|2014-11-13 (R1.0)
Figure 4-25.
Description
Specifies whether to enable the DMS.
To create a DMS, enter the name of the DMS.
Library rescan method that the device supports. Normally, it is set to Auto.
l Disabled
l Auto
l
Customized
By default, the media source is /mnt, that is the root directory of the
device. You can change the root directory to other directory of the
storage device.
4-23
Chapter 4 Configure the Local Network
Table
ZTE Proprietary and Confidential
4-17.
USB
USB