Zte ZXHN H298Q User Manual

Zte ZXHN H298Q User Manual

Home gateway


Home Gateway
User Manual


Table of Contents

Summary of Contents for Zte ZXHN H298Q

  • Page 1 ZXHN H298Q Home Gateway User Manual...
  • Page 3 All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their re- spective owners. This document is provided “as is”, and all express, implied, or statutory...
  • Page 4 ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice. Users may visit ZTE technical support website http://support.zte.com.cn to inquire related information. The ultimate right to interpret this product resides in ZTE CORPORATION.
  • Page 5: Safety Precautions

    Safety Precautions Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions  Read all the safety cautions carefully before using the device.  Only use the accessories included in the package, such as power supply adapter.
  • Page 6: Product Specifications

    Product Specifications The ZXHN H298Q is an advanced home gateway with VoIP that supports 2033Mbps Dual-band concurrent 11ac Wi-Fi. It provides High Speed Internet, IPTV and Voice over IP services through GE uplink. Those services are...
  • Page 7: Hardware Description

    0 °C – 40 °C (32 °F – 104 °F) Operation temperature 5% – 95% (non-condensing) Operation humidity please use the power adapter provided by the manufacturer. Hardware Description Front panel Figure 3-1 shows the front panel of the ZXHN H298Q, and Figure 3-2 shows the indicators.
  • Page 8 Figure 3-1 The Front Panel Figure 3-2 The indicators Description Indicator Status Power off or the power supply is not connected. Power Green Power on.
  • Page 9 The equipment is not powered on or the WAN port is disabled. Broadband The link is activated.
  • Page 10 Description Indicator Status No detected data.The ZXHN H298Q is powered off. Flashing green Currently in data transmission. The WAN connection is online. The device has a WAN IP address from IPCP, DHCP or statically configured. LED remains green Solid green...
  • Page 11 Has not been registered to the VoIP network. Phone1 Flashing green Indicates when the associated telephone is off-hook. Phone2 Has been registered to the VoIP network.
  • Page 12 Flashing green Currently in data transmission. The USB device is connected. Side panel Figure 3-3 shows the interfaces on the side panel of the ZXHN H298Q. Figure 3-3 The Side Panel Interface Function USB2.0 host port, used for the USB storage device,...
  • Page 13 Rear panel Figure 3-4 shows the interfaces and buttons on the rear panel of the ZXHN H298Q.
  • Page 14 Figure 3-4 The Rear Panel Interface/Button Function On/Off Power switch, to power on or power off the device. Power Power supply port, It is connected to the power adapter. WPS Push Button. During power ON period, hold on this button for more than 5 seconds to reset the current settings to the Reset factory default setting, and then the system restarts...
  • Page 15 Phone1 RJ-11 port, it is used to connect to the analog telephone. Phone2 RJ-45 port, it is used to connect the modem to computer LAN1-LAN4 , STB or other network devices. RJ-45 port, it is used to connect to the uplink Ethernet access network.
  • Page 16: Hardware Connection

    Figure 4-1 shows the devices that are connected to interfaces of the ZXHN H298Q. Figure 4-1 Cable Connection After the devices are connected to the ZXHN H298Q device, press the power button. When the corresponding indicators on the front panel are On, you can enjoy various services provided by the service provider.
  • Page 17 wireless router, a cordless phone, or a Bluetooth product.  The product should be installed on the same floor as the applied area.  Do not put other objects on the product. Try to reduce the number of obstacles between the product and a wireless terminal. ...
  • Page 18: Troubleshooting

    Troubleshooting The Power indicator on the front panel is off after the power button is pressed.  Power switch does not turn on.  The power adapter is not correctly connected to the device. Be sure to user the power adapter supplied with the device. The Broadband indicator on the front panel is off after the device is powered on.
  • Page 19  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • Page 20 The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à...

This manual is also suitable for:

Zxhn h298

Table of Contents