1. Manuals
  2. Brands
  3. Zte Manuals
  4. Gateway
  5. ZXHN H168N
  6. Maintenance management manual

Zte ZXHN H168N Maintenance Management Manual

Home gateway
Hide thumbs Also See for ZXHN H168N:
Table of Contents

Advertisement

Quick Links

See also: User Manual
ZXHN H168N
Home Gateway
Maintenance Management Manual
Version: V3.1
ZTE CORPORATION
No. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://support.zte.com.cn
E-mail: support@zte.com.cn

Advertisement

Table of Contents
loading

Related Manuals for Zte ZXHN H168N

Summary of Contents for Zte ZXHN H168N

  • Page 1 ZXHN H168N Home Gateway Maintenance Management Manual Version: V3.1 ZTE CORPORATION No. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://support.zte.com.cn E-mail: support@zte.com.cn...
  • Page 2 ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners.

  • Page 3: Table Of Contents

    2.6 Technical Specifications..................2-5 Chapter 3 Configuration Preparation ............3-1 3.1 Configuring TCP/IP .................... 3-1 3.2 Login to the ZXHN H168N Device ............... 3-2 Chapter 4 ZXHN H168N Home Page ............4-1 Chapter 5 Internet..................5-1 5.1 Describing the Internet Status ................5-1 5.2 WAN .........................
  • Page 4 7.4 System Management..................7-4 7.4.1 Configuring Device Management............... 7-4 7.4.2 Upgrading Firmware ................. 7-5 7.4.3 Managing User Cconfiguration ..............7-6 7.5 Performing Mirror Configuration ................7-7 7.6 Configuring TR-069 .................... 7-8 7.7 Managing Log ....................7-11 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 5 7.8 Configuring Dongle Management ..............7-12 7.9 Diagnosing the Diagnosis ................. 7-12 7.10 ARP Table...................... 7-15 7.11 MAC Table ..................... 7-16 7.12 IPv6 Management ..................7-16 Figures......................I Table .......................V Glossary .......................VII SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 6 This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 7: About This Manual

    The ZXHN H168N is a VDSL2 user access device that supports multiple transmission modes. In addition, the ZXHN H168N provides broadband Internet service and enterprise network access service through high-speed xDSL access mode. Intended Audience This document is intended for:...
  • Page 8 This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 9: Declaration Of Rohs Compliance

    Compliance To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that the ZXHN H168N manufactured by ZTE CORPORATION is in compliance with the Directive 2002/95/EC of the European...
  • Page 10 This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 11: Chapter 1 Safety Precautions

    Chapter 1 Safety Precautions Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Read the user manuals before using the device. Pay attention to all the cautions in the user manuals and on the product.
  • Page 12 ZXHN H168N Maintenance Management Manual This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 13: Chapter 2 Overview

    IEEE 802.11b/g/n standard. It provides users with diversified, personalized, convenient, comfortable, safe, and efficient services. 2.2 Packing List After opening the ZXHN H168N packing box, make sure that it contains the following components, as listed in Table 2-1. Table 2-1 Packing List...

  • Page 14: Product Features

    2.4 Interfaces and Buttons Figure 2-1 shows the ZXHN H168N interfaces and buttons. Figure 2-1 Interfaces and Buttons Table 2-2 lists the description of the ZXHN H168N Interfaces and Buttons. Table 2-2 Interfaces and Buttons Interface/Button Description On/Off Power button, to power on or power off the device.

  • Page 15: Indicators

    • The WPS/WLAN button and USB interface is on a side of the ZXHN H168N. 2.5 Indicators Figure 2-2 shows the ZXHN H168N Indicators on the Front Panel. Figure 2-2 Indicators on the Front Panel Table 2-3 lists the Indicators on the Front Panel.
  • Page 16 ZXHN H168N Maintenance Management Manual Indicator Color Status Description – The device is powered OFF or the line has no signal. Green Flashing connection tries synchronization and training. connection is in synchronization state. Internet – The device is powered off or the DSL connection is not synchronized.

  • Page 17: Technical Specifications

    Description A terminal is connected to the gateway through the WPS function for less than two minutes. 2.6 Technical Specifications Table 2-4 lists the ZXHN H168N Technical Specifications. Table 2-4 Technical Specifications Item Specification Rated current Rated voltage 12 V Working temperature 0 ℃...
  • Page 18 ZXHN H168N Maintenance Management Manual This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 19: Chapter 3 Configuration Preparation

    ZXHN H168N device configuration. To ensure that the ZXHN H168N device accesses the Internet successfully, confgure the computer address in the same network segment as the ZXHN H168N address. The default network settings for the ZXHN H168N are as follows: address: 192.168.1.1...

  • Page 20: Login To The Zxhn H168N Device

    – End of Steps – 3.2 Login to the ZXHN H168N Device This procedure introduces how to log in to the ZXHN H168N device by using the web browser. The ZXHN H168N provides the web-based configuration mode. You can configure and manage the device through the web browser.

  • Page 21: Figure 3-1 Login Page

    3. In the Username and Password text boxes, type the user name and password (by default, both are admin). 4. Click Login. The default home window is displayed, see Figure 3-2. On the left navigation tree, click to perform the corresponding configurations. Figure 3-2 Home Page SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 22 ZXHN H168N Maintenance Management Manual Note: The Web configuration pages may vary with the software versions. The configuration pages for the administrator and user accounts are different. The administrator account is used as an example in this manual. – End of Steps –...

  • Page 23: Chapter 4 Zxhn H168N Home Page

    Chapter 4 ZXHN H168N Home Page The section describes the home page of ZXHN H168N. Steps 1. On the navigation tree, click Home. The device information is displayed, see Figure 4-1. Figure 4-1 Home page 2. The ZXHN H168N homepage`s parameters listed in Table 4-1.
  • Page 24 ZXHN H168N Maintenance Management Manual Parameter Description Setting Setting Displaying the connection Click LAN Setting to of each PC. go to the page of LAN Management-IPv4. Indicates the connection status of the port. – End of Steps – SJ-20140220172310-002|2014-03-03 (R1.0)

  • Page 25: Chapter 5 Internet

    The section describes the status of Internet. The relevant information of Internet status shown as below. Steps 1. On the main page of the ZXHN H168N, select Internet > Status to go to the Internet Status page. The page as shown in Figure 5-1.

  • Page 26: Wan

    5.2.1 Configuring DSL This page provides the parameters of connection configuration function. Steps 1. On the main page of the ZXHN H168N, select Internet > WAN > DSL to go to the DSL page, as shown in Figure 5-2. Figure 5-2 Configuring DSL...

  • Page 27: Figure 5-3 New Item

    Chapter 5 Internet Figure 5-3 New Item 4. Set parameters on different pages in accordance with the settings of the Type, IP Ver sion, Link Type, and PPP TransType parameters. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 28 ZXHN H168N Maintenance Management Manual Figure 5-4 IPv4_PPPoE SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 29 Chapter 5 Internet Figure 5-5 IPv4_PPPoA Figure 5-6 IPv4_IP_DHCP SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 30: Figure 5-7 Ipv4-Ip-Static

    ZXHN H168N Maintenance Management Manual Figure 5-7 IPv4-IP-Static SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 31: Figure 5-8 Ipv6-Ip

    Chapter 5 Internet Figure 5-8 IPv6-IP SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 32: Figure 5-9 Ipv6-Ppp

    ZXHN H168N Maintenance Management Manual Figure 5-9 IPv6-PPP Figure 5-10 Bridge Connection_PTM SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 33 The connection type includes Route, and Bridge Connection. Define the maximum transfer unit. Link Type There are two link types: Transfer Type PPPoE or PPPoA. Username/Password PPPoE/PPPoA user name and password. They are provided by the ISP. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 34 The IPv4_Static IP Address. Subnet Mask Subnet mask of the device. Gateway It is usually the IP address of the ZXHN H168N device by default. DNS1–DNS3 IP address of the DNS server for static connections. You can set up to three IP addresses for the server. These IP addresses are provided by the ISP.

  • Page 35: Configuring 3G

    5.2.2 Configuring 3G This page provides the parameters of the connection configuration function. Steps 1. On the main page of the ZXHN H168N, select Internet > WAN > 3G to go to the 3G page, as shown in Figure 5-13.

  • Page 36: Figure 5-13 Configuring 3G

    ZXHN H168N Maintenance Management Manual Figure 5-13 Configuring 3G 2. Click 3G Device Status to view the status of device. 3. Click The Creation & Configuration of 3G Connection to the Creation & Configuration of 3G Connection page. 4. Click...

  • Page 37: Configuring 4In6 Tunnel Connection

    5.2.3 Configuring 4in6 Tunnel Connection This page provides the parameters of 4in6 Tunnel configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > WAN > 4in6 Tunnel to go to the 4in6 Tunnel page, as shown in Figure 5-15.

  • Page 38: Configuring 6In4 Tunnel Connection

    5.2.4 Configuring 6in4 Tunnel Connection This page provides the parameters of 6in4 Tunnel configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > WAN > 6in4 Tunnel to go to the 6in4 Tunnel page, as shown in Figure 5-16.

  • Page 39: Figure 5-16 6In4 Tunnel Connection

    Setting this parameter when 6in4 Tunnel Configuration is Static. 6rd Border Relay Address Setting this parameter when 6in4 Tunnel Configuration is Static. Tunnel Remote Address Setting this parameter when 6in4 Tunnel Type is Manual Tunnel. 5-15 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 40: Qos

    Global. QoS provides the parameters of configuration function. Steps 1. On the main page of the ZXHN H168N, select Internet > QoS > QoS Global Configuration to go to the QoS Global Configuration page. The page as shown in Figure 5-17.

  • Page 41: Configuring Qos Classification

    5.3.2 Configuring QoS Classification This page provides the parameters of Classification configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > QoS > Classification to go to the Classification page, as shown in Figure 5-18.

  • Page 42: Figure 5-19 Create New Qos Classification

    ZXHN H168N Maintenance Management Manual Figure 5-19 Create New QoS Classification Table 5-5 lists the Classification Configuration parameters. Table 5-5 QoS Classification Configuration for Admin Customized parameters Parameter Description Ingress Specify the data traffic direction. The Ingress option and Egress option cannot be the same.

  • Page 43: Configuring Qos Congestion Management

    Select traffic police rule index. Traffic Class Range: 0~255 3. Click Apply button to apply the changes. – End of Steps – 5.3.3 Configuring QoS Congestion Management This page provides the parameters of Congestion Management configuration features. 5-19 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 44: Figure 5-20 Congestion Management

    ZXHN H168N Maintenance Management Manual Steps 1. On the main page of the ZXHN H168N, select Internet > QoS > Congestion Management to go to the Congestion Management page, as shown in Figure 5-20. Figure 5-20 Congestion Management Table 5-6 lists the congestion management parameters.

  • Page 45: Configuring Qos Traffic Policing

    5.3.4 Configuring QoS Traffic Policing This page provides the parameters of Traffic Policing configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > QoS > Traffic Policing to go to the Traffic Policing page, as shown in Figure 5-22.

  • Page 46: Configuring Qos Traffic Shaping

    5.3.5 Configuring QoS Traffic Shaping This page provides the parameters of Traffic Shaping configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > QoS > Traffic Shaping to go to the Traffic Shaping page, as shown in Figure 5-23.

  • Page 47: Security

    5.4.1 Configuring Firewall Level The section describes how to configurate firewall level. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > Firewall to go to the Firewall page. The page as shown in Figure 5-24.

  • Page 48: Configuring Filter Criteria

    5.4.2 Configuring Filter Criteria The section describes how to configurate filter criteria. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > Filter Criteria to go to the Filter Criteria page, as shown in Figure 5-25.

  • Page 49: Figure 5-25 Filter Criteria

    There are two modes: Black List White List Filter Enable the filter function. There are two modes: Black List White List Filter 3. Click to open MAC Filter page, as shown in Figure 5-26. 5-25 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 50: Figure 5-26 Mac Filter

    ZXHN H168N Maintenance Management Manual Figure 5-26 MAC Filter Table 5-10 lists the Filter parameters. Table 5-10 MAC Filter parameters Parameter Description Name The name of the Filter. Type The type can be Bridge, Route, or Bridge and Route. Protocol The protocol that the filter rule will be applied to.

  • Page 51: Figure 5-28 Ip Filter

    If the Ingress is LAN, the Egress should be a connection. The data traffic direction is upstream. If the Ingress is a connection, the Egress should be the LAN. The data traffic direction is downstream. 5-27 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 52: Configuring Local Service Control

    5.4.3 Configuring Local Service Control The section describes how to configurate local service control. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > Local Service Control to go to the Local Service Control page, as shown in Figure 5-29.

  • Page 53: Figure 5-30 Service Control-Ipv6

    Service Control-IPv6 parameters. Table 5-13 Service Control-IPv6 parameters Parameter Description Name Name of the Service Control item. The name must be specified. Mode The mode includes the following: Allow and Discard. 5-29 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 54: Figure 5-31 Remote Service Port Control-Ipv4

    ZXHN H168N Maintenance Management Manual Parameter Description Ingress Specify the data stream inbound direction, and this parameter must be specified. If the Ingress is LAN, the data flow is upstream. If the Ingress is a WAN connection, the data flow is downstream.

  • Page 55: Configuring Alg

    The section describes how to configurate ALG. ALG provides the relevant parameters of security configuration function. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > ALG to go to the ALG page. The page as shown in Figure 5-32.

  • Page 56: Configuring Port Forwarding

    ZXHN H168N Maintenance Management Manual Steps 1. On the main page of the ZXHN H168N, select Internet > Security > DMZ to go to the DMZ page. The page as shown in Figure 5-33. Figure 5-33 DMZ Table 5-15 lists the parameters.

  • Page 57: Figure 5-34 Port Forwarding

    URL, instead of address. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > Port Forwarding to go to the Port Forwarding page. The page as shown in Figure 5-34.

  • Page 58: Configuring Port Trigger

    The port triggering is used to protect the ports. The system will not open these ports unless these ports are triggered. Steps 1. On the main page of the ZXHN H168N, select Internet > Security > Port Trigger to go to the Port Trigger page. The page as shown in Figure 5-35.

  • Page 59: Figure 5-35 Port Trigger

    Start Port and End Port must be specified and meet the following conditions. The end port number is larger than the start port number. 5-35 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 60: Configuring Ddns

    The section describes how to configurate DDNS. DDNS provides the parameters of DDNS configuration function. Steps 1. On the main page of the ZXHN H168N, select Internet > DDNS to go to the DDNS page. The page as shown in Figure 5-36.

  • Page 61: Configuring Sntp

    The section describes how to configurate SNTP. SNTP provides the parameters of SNTP configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > SNTP to go to the SNTP page. The page as shown in Figure 5-37.

  • Page 62: Configuring Port Binding

    The section describes how to configurate Port Binding. Port Binding provides the parameters of Port Binding configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > Port Binding to go to the Port Binding page. The page as shown in Figure 5-38.

  • Page 63: Configuring Dynamic Routing

    The section describes how to configurate Dynamic Routing. Dynamic Routing provides the parameters of configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > Dynamic Routing to go to the Dynamic Routing page. The page as shown in Figure 5-39.

  • Page 64: Mulitcast

    The section describes how to configurate IGMP. IGMP provides the parameters of IGMP configuration features. Steps 1. On the main page of the ZXHN H168N, select Internet > Multicast > IGMP to go to the IGMP page. The page as shown in Figure 5-41.

  • Page 65: Configuring Mld

    5. Configuring Connection. 6. Click Apply button to apply the changes. – End of Steps – 5.9.2 Configuring MLD The section describes how to configurate MLD. MLD provides the parameters of configuration features. 5-41 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 66: Figure 5-43 Mld

    ZXHN H168N Maintenance Management Manual Steps 1. On the main page of the ZXHN H168N, select Internet > Multicast > MLD to go to the MLD page. The page as shown in Figure 5-43. Figure 5-43 MLD Mode 2. Enable the Mode.
  • Page 67 Chapter 5 Internet 6. Click Apply button to apply the changes. – End of Steps – 5-43 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 68 ZXHN H168N Maintenance Management Manual This page intentionally left blank. 5-44 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 69: Chapter 6 Local Network

    The section describes the status of Local Network. The relevant information of Internet status shown as below. Steps 1. On the main page of the ZXHN H168N, select Local Network > Status to go to the Local Network Status page. The page as shown in Figure 6-1.

  • Page 70: Wlan

    It is the second version of WPA-PSK. WPA/WPA2-PSK It is a hybrid authentication mode. Steps 1. On the main page of the ZXHN H168N, select Local Network > WLAN > WLAN Basic to go to the WLAN Basic page. The page as shown in Figure 6-2.

  • Page 71: Figure 6-2 Wlan Basic Settings

    The default is 20 Mhz. Enable this option to increase the traffic flow. Beacon Interval Time interval for the wireless device to broadcast the SSID information. Keep the default value. Transmitting Power Select the transmitting power as required. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 72: Figure 6-3 Wlan Ssid Settings

    ZXHN H168N Maintenance Management Manual Parameter Description Type There are three types: Disable SSID Threshold Specify the request to send threshold for a packet. When a packet exceeds this value, the device sends the value to the destination point for negotiation. The default is 2347.

  • Page 73: Configuring Wlan Advanced

    Advanced. WLAN Advanced provides the parameters of WLAN Advanced configuration features. Steps 1. On the main page of the ZXHN H168N, select Local Network > WLAN > WLAN Advanced to go to the WLAN Advanced page. The page as shown in Figure 6-4.

  • Page 74: Figure 6-4 Wlan Advanced

    ZXHN H168N Maintenance Management Manual Figure 6-4 WLAN Advanced Acess Control-Mode Settings 2. Select the WLAN SSID type. 3. Click Apply button to apply the changes. Acess Control-Rlue Settings 4. Configure the Acess Control-Rlue Setting parameters. 5. Click Acess Control-Rlue Setting to the page of Acess Control-Rlue Setting configuration.

  • Page 75: Wmm

    – End of Steps – 6.2.3 WMM The section describes how to configurate WMM. Steps 1. On the main page of the ZXHN H168N, select Local Network > WLAN > WMM to go to the WMM page, as shown in Figure 6-6.

  • Page 76: Lan

    The relevant information of Internet status includes Allocated Address, DHCP Server, DHCP Binding and Port Control-DHCP. Steps 1. On the main page of the ZXHN H168N, select Local Network > LAN > IPv4 to go to the LAN Management-IPv4 page. The page as shown in Figure 6-7.

  • Page 77: Figure 6-8 Dhcp Server

    The end address of the DHCP address pool. Gateway It is usually the address of the ZXHN H168N device by default. Assign IspDNS Select On to let the Assign IspDNS work. Primary addresses of the server1, provided by the ISP.

  • Page 78: Figure 6-9 Dhcp Binding

    ZXHN H168N Maintenance Management Manual Note: DHCP Server configuration options vary with the Lease Time Mode value. 6. Click Apply button to apply the changes. DHCP Binding 7. Click DHCP Binding. The page as shown in Figure 6-9. Figure 6-9 DHCP Binding 8.

  • Page 79: Configuring Lan Management-Ipv6

    Before configuring the prefix delegation, make sure that the prefix delegation is enabled for the specified IPv6 WAN connection. Steps 1. On the main page of the ZXHN H168N, select Local Network > LAN > IPv6 to go to the IPv6 page. The page as shown in Figure 6-11.

  • Page 80: Figure 6-11 Lan Management-Ipv6

    ZXHN H168N Maintenance Management Manual Figure 6-11 LAN Management-IPv6 Allocated Address 2. Click Allocated Address. 3. Click Refresh to refresh the informations. DHCP Server 4. Click DHCP Server. The page as shown in Figure 6-12. Figure 6-12 DHCP Server 5. Configure the DHCP Server parameters.

  • Page 81: Figure 6-13 Prefix Management

    SSID on which you want to disable the DHCP function. Note: Click All On to select all IPv6 DHCP Service-Port Control types. Click All Off to cancel all IPv6 DHCP Service-Port Control types. 6-13 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 82: Figure 6-15 Ra Service

    ZXHN H168N Maintenance Management Manual 10. Click Apply button to apply the changes. Service 11. Click RA Service. The page as shown in Figure 6-15. Figure 6-15 RA Service 12. Configure the Service parameters. Table 6-8 lists the Service parameters.

  • Page 83: Route

    Before configuring static routing, make sure that the IPv4 WAN connection is created. Steps 1. On the main page of the ZXHN H168N, select Local Network > Route > IPv4 to go to the Route-IPv4 page. The page as shown in Figure 6-16.

  • Page 84: Figure 6-17 Default Routing

    ZXHN H168N Maintenance Management Manual 3. Click Refresh to refresh the informations. Default Routing 4. Click Default Routing. The page as shown in Figure 6-17. Figure 6-17 Default Routing 5. Configure the Interface parameters. 6. Click Apply button to apply the changes.

  • Page 85: Figure 6-19 Policy Routing

    The name of Policy routing entry. Interface connection for policy routing Source Source address. Source Mask Source mask of the network segment. Destination Destination address. Destination Mask Destination mask of the network segment. 6-17 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 86: Configuring Route-Ipv6

    The relevant information of Internet status includes Routing Table, Default Routing, Static Routing, and Policy Routing. Steps 1. On the main page of the ZXHN H168N, select Local Network > Route > IPv6 to go to the Route-IPv6 page. The page as shown in Figure 6-20.

  • Page 87: Figure 6-20 Route-Ipv6

    The page as shown in Figure 6-21. Figure 6-21 Default Routing 5. Configure the Interface parameters. 6. Click Apply button to apply the changes. Static Routing 7. Click Static Routing. The page as shown in Figure 6-22. 6-19 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 88: Figure 6-22 Static Routing

    ZXHN H168N Maintenance Management Manual Figure 6-22 Static Routing 8. Configure the Static Routing parameters. Table 6-11 lists the Static Routing parameters. Table 6-11 Static Routing parameters Parameter Description Entry Name The name of Static routing entry. Interface connection for static routing...

  • Page 89: Figure 6-23 Policy Routing

    Source port number. Destination Port Destination port number. Source Source address. Note: The Policy Routing configuration options vary with the Protocol value. 12. Click Apply button to apply the changes. – End of Steps – 6-21 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 90: Configuring Ftp

    ZXHN H168N device. Steps 1. On the main page of the ZXHN H168N, select Local Network > FTP to go to the FTP page. The page as shown in Figure 6-24.

  • Page 91: Configuring Dms

    The section describes how to configurate DMS. DMS provides the parameters of configuration features. is a multimedia server defined in DLNA protocol, which uses UPnP protocol to search and categorize the local media files or photos, and provide services for the DMP. 6-23 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 92: Figure 6-26 Dms

    UPnP function is enabled. device is connected to the ZXHN H168N device. Steps 1. On the main page of the ZXHN H168N, select Local Network > DMS to go to the DMS page. The page as shown in Figure 6-26.

  • Page 93: Samba Service

    6.8 Samba Service This page provides the parameters of Samba configuration features. Steps 1. On the main page of the ZXHN H168N, select Local Network > Samba Service to go to the Samba Service page. The page as shown in Figure 6-27.

  • Page 94: Configuring Dns

    The relevant information of Internet status includes Domain name, Host Name and DNS Relay. Steps 1. On the main page of the ZXHN H168N, select Local Network > DNS to go to the DNS page. The page as shown in Figure 6-28.

  • Page 95: Figure 6-29 Host Name

    The page as shown in Figure 6-30. Figure 6-30 DNS Relay 8. Type the address of the server assigned by the ISP. 9. Click Apply button to apply the changes. – End of Steps – 6-27 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 96 ZXHN H168N Maintenance Management Manual This page intentionally left blank. 6-28 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 97: Chapter 7 Management & Diagnosis

    The section describes the status of Management & Diagnosis. The relevant information of Management & Diagnosis status shown as below. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Status to go to the Status page. The page as shown in Figure 7-1.

  • Page 98: Configuring Account Management

    This procedure introduces how to manage the user accounts and rights. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Account Management to go to the Account Management page. The page as shown in Figure 7-2.

  • Page 99: Configuring Login Timeout

    Specify the new password. Confirmed Password Confirm the new password. 5. Click Apply button to apply the changes. – End of Steps – 7.3 Configuring Login Timeout This procedure introduces how to configure the login timeout. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 100: System Management

    ZXHN H168N Maintenance Management Manual Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Login Timeout to go to the Login Timeout page. The page as shown in Figure 7-4. Figure 7-4 Login Timeout 2.

  • Page 101: Upgrading Firmware

    Before upgrading software, make sure that the upgrade file is ready. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > System Management > Firmware Upgrade to go to the Firmware Upgrade page. The page as shown in Figure 7-6.

  • Page 102: Managing User Cconfiguration

    The user can configure the device settings based on his own requirements, and the configuration can be backed up. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > User Config Management to go to the User Config Management page. The page as shown in Figure 7-7.

  • Page 103: Performing Mirror Configuration

    Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Mirror Configuration to go to the Mirror Configuration page. The page as shown in Figure 7-8.

  • Page 104: Figure 7-8 Mirror Configuration

    TR-069 configuration features. The relevant TR-069 includes Basic configuration and Certificate Management. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > TR-069 to go to the TR-069 page. The page as shown in Figure 7-9.
  • Page 105 Default: http://0.0.0.0:9090/web/tr069 Username/Password User name and password for the ZXHN H168N device to log in to the automatic configuration server. Connection Request Connection request URL, which is automatically generated by the system.

  • Page 106: Figure 7-10 Certificate Management

    ZXHN H168N Maintenance Management Manual Parameter Parameter Cetrificate Chain Auto: Automatically select the first chain certifcate authentication or the second chain certificate authentication Chain1: The first chain certifcate authentication Chain2: The second chain certifcate authentication Authenticating File Server Enable the TR-069 authenticating file server.

  • Page 107: Managing Log

    7.7 Managing Log This procedure introduces how to manage logs. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Log Management to go to the Log Management page. The page as shown in Figure 7-11.

  • Page 108: Configuring Dongle Management

    7.8 Configuring Dongle Management This page provides the Dongle management configuration features. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > Dongle Management to go to the Dongle Management page, as shown in Figure 7-12.

  • Page 109: Figure 7-13 Diagnosis

    WAN/LAN connection from the Egress drop-down list. 4. Click Diagnosis to diagnose the connection, and the system will display the following diagnosis results. Trace Route Diagnosis 5. Click Trace Route Diagnosis. The page as shown in Figure 7-15. 7-13 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 110: Figure 7-15 Trace Route Diagnosis

    ZXHN H168N Maintenance Management Manual Figure 7-15 Trace Route Diagnosis 6. Type the address or host name in the IP Address/Host Name text box, select one connection, specify the Maximum Hops, Wait time, and Protocol. 7. After the configuration, click Diagnosis.

  • Page 111: Arp Table

    7.10 ARP Table The relevant information of table is shown as below. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > ARP Table to go to the ARP Table page, as shown in Figure 7-18.

  • Page 112: Mac Table

    7.11 MAC Table The relevant information of table is shown as below. Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > MAC Table to go to the MAC Table page, as shown in Figure 7-19.

  • Page 113: Figure 7-20 Ipv6 Management

    Chapter 7 Management & Diagnosis Steps 1. On the main page of the ZXHN H168N, select Management & Diagnosis > IPv6 Management to go to the IPv6 Management page, as shown in Figure 7-20. Figure 7-20 IPv6 Management 2. Select enable IPv6 Switch function.
  • Page 114 ZXHN H168N Maintenance Management Manual This page intentionally left blank. 7-18 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 115: Figures

    Figure 5-21 The Statistical Information of QoS Queues........... 5-21 Figure 5-22 Traffic Policing ..................5-21 Figure 5-23 Traffic Shaping..................5-23 Figure 5-24 Firewall ....................5-24 Figure 5-25 Filter Criteria ..................5-25 Figure 5-26 MAC Filter.................... 5-26 Figure 5-27 URL Filter .................... 5-26 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 116 ZXHN H168N Maintenance Management Manual Figure 5-28 IP Filter ....................5-27 Figure 5-29 Local Service Control................5-28 Figure 5-30 Service Control-IPv6 ................5-29 Figure 5-31 Remote Service Port Control-IPv4 ............5-30 Figure 5-32 ALG ..................... 5-31 Figure 5-33 DMZ..................... 5-32 Figure 5-34 Port Forwarding ...................
  • Page 117 Figure 7-15 Trace Route Diagnosis................. 7-14 Figure 7-16 PPPoE Diagnosis ................7-14 Figure 7-17 DSL Line Diagnosis ................7-15 Figure 7-18 ARP Table.................... 7-16 Figure 7-19 MAC Table ................... 7-16 Figure 7-20 IPv6 Management................7-17 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 118 Figures This page intentionally left blank. SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

  • Page 119: Table

    Table 6-1 WLAN Global Configuration parameters ............ 6-3 Table 6-2 WLAN SSID setting parameters ..............6-4 Table 6-3 Acess Control-Rlue setting parameters ............. 6-6 Table 6-4 WMM parameters..................6-7 Table 6-5 DHCP Server parameters................6-9 SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 120 ZXHN H168N Maintenance Management Manual Table 6-6 DHCP Binding parameters ..............6-10 Table 6-7 DHCP Server parameters................ 6-12 Table 6-8 RA Service parameters ................6-14 Table 6-9 Static Routing parameters ............... 6-16 Table 6-10 Policy Routing parameters..............6-17 Table 6-11 Static Routing parameters ..............6-20 Table 6-12 Policy Routing parameters..............

  • Page 121: Glossary

    - Constant Bit Rate CHAP - Challenge Handshake Authentication Protocol - Direct Current DDNS - Dynamic Domain Name Server DHCP - Dynamic Host Configuration Protocol DLNA - Digital Living Network Alliance - Digital Media Server SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 122 ZXHN H168N Maintenance Management Manual - Demilitarized Zone - Domain Name System DSCP - Differentiated Services Code Point - Digital Subscriber Line DTIM - Delivery Traffic Indication Message DWRR - Deficit Weighted Round Robin - File Transfer Protocol - Global Unicast Address...
  • Page 123 - Point-to-Point Protocol PPPoA - Point to Point Protocol over ATM PPPoE - Point to Point Protocol over Ethernet - Packet Transfer Mode - Quality of Service - Routing Area - Routing Information Protocol SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...
  • Page 124 ZXHN H168N Maintenance Management Manual RIPng - Routing Information Protocol next generation - Request To Send RoHS - Restriction of Hazardous Substances - Sustainable Cell Rate - Short Guard Interval SLAAC - Stateless Address Autoconfiguration SNTP - Simple Network Time Protocol...
  • Page 125 - Virtual Local Area Network - Video On Demand - Virtual Path Identifier - Wide Area Network WLAN - Wireless Local Area Network - Wi-Fi MultiMedia - Wi-Fi Protected Access - Wi-Fi Protected Setup SJ-20140220172310-002|2014-03-03 (R1.0) ZTE Proprietary and Confidential...

Table of Contents