Configure The Advanced Parameters Of Voip; Figure 5-2 Sip Accounts Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide
Steps
1. Select Application > VoIP > SIP Accounts. The SIP Accounts page is displayed,
see Figure

Figure 5-2 SIP Accounts Page

2. Set the parameters. For a description of the parameters, refer to .
Table 5-1 Parameter Descriptions for the SIP Accounts
Parameter
SIP Account
Password
Authorization
Username
3. Click Apply.
– End of Steps –

5.3 Configure the Advanced Parameters of VoIP

This procedure describes how to configure advanced parameters of the
including echo cancellation, jitter buffer, and DTMF.
Steps
1. Select VoIP > Advanced. The Advanced page is displayed, see
SJ-20140702105807-002|2014-11-13 (R1.0)
5-2.
Description
Registered name of a SIP subscriber. Normally, it is the phone number
of the subscriber.
Password for VoIP service authentication by the SS system, which must be
the same as that configured in the SS system.
Username for authentication by the SS system, which must be the same as
that configured in the SS system.
5-2
VoIP
Figure 5-3.
ZTE Proprietary and Confidential
service,