Configure The Local Service Control; Figure 3-20 Local Service Control Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide
Parameter
Egress
12. Click Apply button to apply the changes.
– End of Steps –

3.4.3 Configure the Local Service Control

The section describes how to configure local service control.
Steps
1. On the main page of the ZXHN H267N, select Internet > Security > Local Service
Control to go to the Local Service Control page, as shown in

Figure 3-20 Local Service Control Page

Local Service Control-IPv4
2. Configuring Local Service Control-IPv4 parameters.
Table 3-14
SJ-20140702105807-002|2014-11-13 (R1.0)
lists the Local Service Control-IPv4 parameters.
3-26
Description
Specify the data traffic direction. The Ingress option and
Egress option cannot be the same.
l
If the Ingress is LAN, the Egress should be a WAN or
3G connection. The data traffic direction is upstream.
l If the Ingress is a WAN or 3G connection, the Egress
should be the LAN. The data traffic direction is
downstream.
ZTE Proprietary and Confidential
Figure 3-20.