Configure The Route(Ipv6); Figure 4-20 Routing Table(Ipv6) Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide
The Policy Routing configuration options vary with the Protocol value.
9. Click Apply button to apply the changes.
– End of Steps –

4.4.2 Configure the Route(IPv6)

The section describes how to configure Route-IPv6.
The relevant information of Internet status includes Routing Table, Static Routing, and
Policy Routing.
Prerequisite
Before configuring Route(IPv6), make sure that the
Steps
1. On the main page of the ZXHN H267N, select Local Network > Route > IPv6 to go
to the Route(IPv6) page.
Routing table.
2. Click Routing Table.
The page is shown in

Figure 4-20 Routing Table(IPv6) Page

3. Click Refresh to refresh the informations.
Static routing.
SJ-20140702105807-002|2014-11-13 (R1.0)
Note:
Figure
IPv6 WAN
4-20.
4-18
connection is created.
ZTE Proprietary and Confidential