Configure The Dms; Figure 4-24 Upnp Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide

Figure 4-24 UPnP Page

Table 4-16
Table 4-16 Parameter Descriptions for the UPnP
Parameter
IPv4 WAN Connection
Advertisement Period
Advertisement Time To Live
IPv6 WAN Connection
2. Click Apply button to apply the changes.
– End of Steps –

4.7 Configure the DMS

The section describes how to configure DMS.
Prerequisite
The USB
SJ-20140702105807-002|2014-11-13 (R1.0)
lists the UPnP parameters.
device is connected to the ZXHN H267N device.
Description
IPv4 WAN connection for UPnP.
Time period that the UPnP device sends an announcement
packet.
If the UPnP device does not send any announcement
packets during this period, it indicates that the device is
invalid.
By default, the period is 30 minutes.
The time to live for the advertisement. The advertisement
will be abandoned after it has been transferred for the
specified times by the routers. The default value is 4.
IPv6 WAN connection for UPnP.
4-22
ZTE Proprietary and Confidential