Figure 3-25 Port Forwarding Configuration Page - Zte ZXHN H267N Management Manual

Steps
1. On the main page of the ZXHN H267N, select Internet > Security > Port Forwarding
to go to the Port Forwarding page, the page as shown in

Figure 3-25 Port Forwarding Configuration Page

2. Configure the Port Forwarding parameters.
Table 3-18
Table 3-18 Parameter Descriptions for the Port Forwarding
Parameter
Name
Protocol
WAN Connection
WAN Host
MAC Mapping
LAN Host
LAN Host MAC Address
WAN Port Range
LAN Host Port Range
SJ-20140702105807-002|2014-11-13 (R1.0)
lists the Port Forwarding settings parameters.
IP Range
IP
Chapter 3 Configure the Internet
Description
Virtual host name, which cannot be null.
Protocol name, including TCP, UDP, as well as
UDP.
The default protocol is TCP.
WAN connection that is used to access the virtual host.
IP address segment of the WAN-side hosts.
Enable the MAC mapping function and map the
addresses of the LAN-side hosts to a single
IP address of the LAN-side host.
The MAC address of LAN-side host.
Port segment of the WAN-side hosts.
Port number range of the LAN-side host. Range: 1~
65535.
3-31
ZTE Proprietary and Confidential
Figure 3-25.
TCP AND
MAC
MAC address.