Page 2
Additionally, the contents of this document are protected by contractual confidentiality obligations. All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners. This document is provided “as is”, and all express, implied, or statutory...
Page 3
Safety Precautions Warning! Before using the device, read the following safety precautions. ZTE bears no liability to the consequences incurred by violation of the safety instructions. Usage Cautions � Read all the safety cautions carefully before using the device.
Page 4
Cleaning Requirements � Before cleaning, power off the device, and unplug all the cables connected to the device, such as power cable, optical fiber, and Ethernet cable. � Do not use any liquid or spray to clean the device. Use a soft dry cloth. Environment Protection �...
Page 5
a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5. ATTACHMENT LIMITATIONS STATEMENT Notice: This equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s).
Page 6
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Page 8
The product is targeted to pvovide 24-hours continuous triple-play services, including VOIP. Figure 3-1 shows the interfaces and buttons on the back panel of the ZXHN H267N device. Figure 3-1 The Back Panel...
Page 9
WLAN Enable/disable the WLAN function. WPS button Enable/disable the Wi-Fi protection. When the Wi-Fi protection is enabled, users can access the network automatically. USB 2.0 interface • The USB interface is on a side of the ZXHN H267N. Indicator...
Page 10
Figure 4-1 shows the indicators on the front panel of the ZXHN H267N unit.
Page 11
Figure 4-1 The Front Panel Table 4-1 describes the indicators on the front panel of the ZXHN H267N unit. Table 4-1 Descriptions of Indicators LED Indicator Description Status Solid Power The ZXHN H267N is powered green The ZXHN H267N is powered OFF.
Page 12
Link has not been established. Solid The connection is established and Internet green a correct IP address is obtained. Flashing Currently in data transmission. Internet connection is not established, or the ZXHN H267N is switched off.
Page 13
LED Indicator Status Description Solid The WLAN RF switch is on. WLAN green Flashing Currently in data transmission. green Flashing frequency indicates WiFi network traffic. Solid red WPS access is successful. This solid-on light will be automatically off after 5 minutes.
Page 14
The ZXHN H267N has registered green Phone2 on the VoIP network. Flashing Indicates when the associated telephone is off-hook. The ZXHN H267N has not been registered on the VOIP network. Solid The USB device is connected. green Flashing Currently in data transmission.
Need help?
Do you have a question about the ZXHN H267N and is the answer not in the manual?
Questions and answers