Figure 3-21 Service Control-Ipv6 Page - Zte ZXHN H267N Management Manual

Table 3-14 Parameter Descriptions for the Service Control-IPv4
Parameter
Name
Mode
Ingress
IP Address Range
Service Type
Service Control-IPv6
3. Click Service Control-IPv6 to open Service Control-IPv6 page, as shown in
3-21.

Figure 3-21 Service Control-IPv6 Page

Table 3-15
Table 3-15 Parameter Descriptions for the Service Control-IPv6
Parameter
Name
Mode
SJ-20140702105807-002|2014-11-13 (R1.0)
lists the Service Control-IPv6 parameters.
3-27
Chapter 3 Configure the Internet
Description
Name of the Service Control item.
The name must be specified.
The mode includes the following:
l
Allow
l
Discard
Specify the data stream inbound direction, and this
parameter must be specified.
l
If the Ingress is LAN, the data flow is upstream.
l
If the Ingress is a WAN
flow is downstream.
TheIP address segment that needs to be filtered.
When the IP segment is null, it refers to all the
addresses.
Specify the service that is permitted or denied to access.
Description
Name of the Service Control item.
The name must be specified.
The mode includes the following: Allow and Discard.
ZTE Proprietary and Confidential
or 3G connection, the data
IP
Figure