Configure The Advanced Parameters Of Voip; Figure 6-2 Sip Accounts Page - Zte ZXHN H268A Maintenance Management Manual

ZXHN H268A Maintenance Management Manual(EXETEL)
Steps
1. Select VoIP > Basic. The SIP Accounts page is displayed, see

Figure 6-2 SIP Accounts Page

2. Set the parameters. For a description of the parameters, refer to
Table 6-1 Parameter Descriptions for the SIP Accounts
Parameter
SIP Account
Password
Authorization
Username
3. Click Apply button to apply the changes.
– End of Steps –

6.3 Configure the Advanced Parameters of VoIP

This procedure describes how to configure advanced parameters of the
including echo cancellation, jitter buffer, and DTMF.
Steps
Advanced Parameters
1. Select VoIP > Advanced > Advanced Parameters. The advanced parameters page
is displayed, as shown in
SJ-20150916162339-007|2017-02-16 (R1.0)
Description
Registered name of a SIP subscriber. Normally, it is the phone number
of the subscriber.
Password for VoIP service authentication by the SoftSwitch system, which
must be the same as that configured in the SoftSwitch system.
Username for authentication by the SoftSwitch system, which must be the
same as that configured in the SoftSwitch system.
Figure 6-3.
6-2
Figure 6-2.
Table 6-1.
VoIP
ZTE Proprietary and Confidential
service,