Chapter 2 Configuration Preparation; Configure Tcp/Ip - Zte ZXHN H267N Management Manual

Chapter 2
Configuration Preparation
This manual uses the Windows operating system as an example for describing how to
configure the ZXHN H267N. Before configuring the ZXHN H267N, you need to perform
the following operations:
l
Ensure that a crossover or straight-through Ethernet cable connects a computer to
the device.
l
Ensure that the
l
Stop any firewall or other security software operating on the computer.
l
Disable the proxy setting of Internet Explorer.
Table of Contents

Configure TCP/IP .......................................................................................................2-1

Login ..........................................................................................................................2-2
2.1 Configure TCP/IP
To log in to the ZXHN H267N on a computer, you need to set the
to ensure that the
H267N are in the same network segment.
Context
The default maintenance
l
IP address: 192.168.1.1
l
Subnet mask: 255.255.255.0
l
Default gateway: 192.168.1.1
Steps
1. Use an ethernet cable to connect a local computer to the
H267N.
2. On the local computer, double-click Local Area Connection and click Properties.
The Local Area Connection Properties dialog box is displayed.
3. Double-click Internet Protocol (TCP/IP). The Internet Protocol (TCP/IP) Properties
dialog box is displayed. Set the IP address to 192.168.1.200, subnet mask to
255.255.255.0, and default gateway to 192.168.1.1.
4. Click OK.
– End of Steps –
SJ-20140702105807-002|2014-11-13 (R1.0)
TCP/IP configuration on the computer is correct.
IP address of the computer and the maintenance
IP address of the ZXHN H267N is as follows:
2-1
IP address of the computer
IP address of the ZXHN
LAN interface of the ZXHN
ZTE Proprietary and Confidential