Zte ZXHN H267N Management Manual page 28

ZXHN H267N Maintenance Management Guide
Parameter
SCR
MBS
Type
Service List
VLAN
VLAN ID
6. Click Apply.
DSL Modulation Parameters
7. Click DSL Modulation Parameters to go to the page of DSL Modulation Parameters,
as shown in
SJ-20140702105807-002|2014-11-13 (R1.0)
Switch
Figure 3-8.
Description
Sustainable Cell Rate.
If Service Type is selected to be RT-VBR or nRT-VBR,
SCR needs to be configured.
Maximum Burst Size.
If Service Type is selected to be RT-VBR or nRT-VBR,
MBS needs to be configured.
The connection type includes Route and Bridge
Connection.
In this case, Bridige is selected.
Default:INTERNET.
Enable or disable theVLAN
If theVLAN function is enabled, VLAN ID is needed to be
configured.
Range: 1–4094. To ensure normal service operation, the
VLAN ID must be the same as that set in upper-layer OLT
configuration.
3-12
ZTE Proprietary and Confidential
function.