– End of Steps –
3.2.2 Configure the DSL
This procedure describes how to configure the DSL on the network side, so that user
services can be connected to the external network.
The ZXHN H267N supports Route-based and Bridge-based WAN connections.
l
Route-based connection
l
Bridge-based connection
Steps
1. On the main page of the ZXHN H267N, select Internet > WAN > DSL to go to the DSL
page, as shown in
Figure 3-5 DSL Configuring page
Creation and Configuration of
2. Click The Creation & Configuration of DSL Connection.
3. Click
Route-based connection
4. Set the parameter Type to be Route.
displayed,
SJ-20140702105807-002|2014-11-13 (R1.0)
Figure
3-5.
DSL
to go to the page of creating new
seeFigure
3-7.
Chapter 3 Configure the Internet
Connection
The Route-based connection page is
3-7
ZTE Proprietary and Confidential
DSL
connection.