Zte ZXHN H267N Management Manual page 25

Parameter
Service List
PCR
SCR
MBS
Type
Encapsulation Type
MTU
Link Type
PPP Transfer Type
PPP
Username/Password
IP Version
IPv4
SJ-20140702105807-002|2014-11-13 (R1.0)
Chapter 3 Configure the Internet
Description
Options: INTERNET, TR069, INTERNET_TR069_, VoIP,
INTERNET_VoIP, VoIP_TR069, INTERNET_VoIP_TR069,
and OTHER.
This parameter must be consistent with service
configuration. For example, if INTERNET is selected, it
indicates that the WAN connection supports the Internet
access service only. If TR069 is selected, it indicates
that the WAN connection supports remote management.
If VoIP is selected, it indicates that the WAN connection
supports the voice service.
If Service Type is selected to be CBR,RT-VBR or
nRT-VBR, PCR needs to be configured.
Sustainable Cell Rate.
If Service Type is selected to be RT-VBR or nRT-VBR,
SCR needs to be configured.
Maximum Burst Size.
If Service Type is selected to be RT-VBR or nRT-VBR,
MBS needs to be configured.
The connection type includes Route and Bridge
Connection.
In this case, Route is selected.
The encapsulation type includes LLC and VCMUX.
Define the maximum transfer unit.
In this case, default value is 1492.
There are two link types:
l
PPP
l IP
In this case, default value is PPPoE.
If xDSL Transfer ModeEnter is selected to be ATM,
Transfer Type includes
PPPoE/PPPoA user name and password.
They are provided by the ISP.
The IP version includes:
l
IPv4
l
IPv6
l
IPv4/v6
In this case, IPv4 is selected.
3-9
ZTE Proprietary and Confidential
PPPoE and PPPoA.
PPP