Figure 3-22 Remote Service Port Control-Ipv4 Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide
Parameter
Ingress
Prefix
Service Type
4. Click Apply button to apply the changes.
Remote Service Port Control-IPv4
5. Click Remote Service Port Control-IPv4 to open Remote Service Port Control-IPv4
page, as shown in

Figure 3-22 Remote Service Port Control-IPv4 Page

Table 3-16
Table 3-16 Parameter Descriptions for the Remote Service Port Control-IPv4
Parameter
HTTP
FTP
SSH
TELNET
HTTPS
6. Click Apply button to apply the changes.
– End of Steps –
SJ-20140702105807-002|2014-11-13 (R1.0)
Figure 3-22.
lists the Remote Service Port Control-IPv4 parameters.
3-28
Description
Specify the data stream inbound direction, and this
parameter must be specified.
l
If the Ingress is LAN, the data flow is upstream.
l
If the Ingress is a WAN connection, the data flow is
downstream.
IPv6 address prefix.
Type Specify the service that is permitted or denied to
access.
Description
The remote service port control of HTTP.
The remote service port control of FTP.
The remote service port control of SSH.
The remote service port control of TELNET.
The remote service port control of HTTPs.
ZTE Proprietary and Confidential