Zte ZXHN H267N Management Manual page 37

Table 3-9 Parameter Descriptions for the QoS Traffic Policing
Parameter
MeterType
CommittedRate
CommittedBurstSize
ConformingAction
NonConformingAction
ExcessBurstSize
PartialConformingAction
DSCP
802.1p
PeakRate
PeakBurstSize
2. Click Apply button to apply the changes.
– End of Steps –
SJ-20140702105807-002|2014-11-13 (R1.0)
Description
The meter type includes:
l
Simple Token Bucket
l Simple Rate Three Color
l Two Rate Three Color
Guaranteed rate.
Buffer size for QoS.
The conforming action includes:
l
Null
l
Drop
l
DSCPMark
l
802.1pMark
l
DSCPMark&802.1pMark
The non conforming action includes:
l
Null
l
Drop
l DSCPMark
l 802.1pMark
l DSCPMark&802.1pMark
Excess burst size.
The partial conforming action includes:
l
Null
l
Drop
l DSCPMark
l 802.1pMark
l DSCPMark&802.1pMark
QoS classification criterion. A DSCP is specified for the TOS byte
in the IP header of each packet to indicate the priority. Range:
0–63.
If VLAN is enabled, you can modify service priority through this
parameter. Range: 0–7. A higher number indicates a higher
priority.
Peak rate.
Peak burst size.
3-21
Chapter 3 Configure the Internet
ZTE Proprietary and Confidential