Zte ZXHN H267N Management Manual page 59

Table 4-1 Parameter Descriptions for the WLAN Global Configuration
Parameter
Wireless RF Mode
Channel
Mode
SSID
Country/Region
Beacon Interval
Transmitting Power
QoS Type
RTS Threshold
DTIM
Fragment Threshold
4. Click Apply button to apply the changes.
WLAN SSID Settings
5. Click WLAN Global Prameter.
The page is shown in
SJ-20140702105807-002|2014-11-13 (R1.0)
Isolation
Interval
Figure
Chapter 4 Configure the Local Network
Description
Select On to enable the wireless RF function.
The default is Auto.
Select the wireless RF transmission mode.
Select On, so that the wireless clients with the different
SSIDs can not access each other.
Select the country or region.
Time interval for the wireless device to broadcast the
information. Keep the default value.
Select the transmitting power as required.
There are twoQoS types:
l
Disable
l WMM
Specify the request to send threshold for a packet. When a
packet exceeds this value, the device sends the
to the destination point for negotiation. The default is 2347.
Range: 1 – 5.
Default: 1.
Default: 2346.
4-3.
4-3
ZTE Proprietary and Confidential
SSID
RTS value