Configure The Dynamic Routing; Figure 3-29 Port Binding Configuration Page - Zte ZXHN H267N Management Manual

ZXHN H267N Maintenance Management Guide
Steps
1. On the main page of the ZXHN H267N, select Internet > Port Binding to go to the
Port Binding page,the page as shown in

Figure 3-29 Port Binding Configuration Page

2. Select the WAN connection, and select the LAN port or SSID that you want to bind.
l
Click All On to select all Port Binding types.
l
Click All Off to cancel all Port Binding types.
3. Click Apply button to apply the changes.
– End of Steps –

3.8 Configure the Dynamic Routing

The section describes how to configure Dynamic Routing. Dynamic Routing provides the
parameters of
Steps
1. On the main page of the ZXHN H267N, select Internet > Dynamic Routing to go to
the Dynamic Routing page.
The page is shown in
SJ-20140702105807-002|2014-11-13 (R1.0)
Note:
RIP configuration features.
Figure
Figure 3-29.
3-30.
3-36
ZTE Proprietary and Confidential