Zte ZXHN H267N Management Manual page 21

Parameter
GUA From
IPv6
DNSv6 From
DNS1/DNS2/D-
NS3
Prefix Delegation
From
GUA From Prefix
VLAN Switch
VLAN ID
Bridge-based connection
5. Set the parameter Type to be Bridge connection. The Bridge-based connection
page is displayed,
SJ-20140702105807-002|2014-11-13 (R1.0)
Description
Specifies how to acquire the global
Info Get Mode parameter is set to Manual Mode. Options:
l
SLAAC: The device generates a global address in accordance with the
RA packets from the upper-layer server.
l Static: You need to set a static
l DHCPv6: The device acquires a global address through DHCPv6.
Specifies the static IPv6 address and prefix length for the
It is valid only if the GUA From parameter is set to Static.
Specifies how to acquire the IPv6 DNS address. It is valid only if the IPv6
Info Get Mode parameter is set to Manual Mode. Options:
l SLAAC: The device generates a DNS address in accordance with the
RA packets from the upper-layer server.
l Static: You need to set static DNS addresses. A maximum of three
DNS server addresses can be configured. If DNS Server 1 fails to
process the domain name resolution request, the request is sent to DNS
Server 2. If DNS Server 2 fails, the request is sent to DNS Server 3.
l
DHCPv6: The device acquires a DNS address through DHCPv6.
If no option is selected, it indicates that no DNS is configured.
IP address of the DNS server for static connections. You can set up to three
IP addresses for the server. These IP addresses are provided by the ISP.
Valid only if the IPv6 Info Get Mode parameter is set to Auto Mode or
Manual Mode. If the prefix delegation function is enabled, the system
requests a prefix from the upper-layer server for allocating global addresses
to devices on the LAN side.
Valid only if the prefix delegation feature is enabled.
If it is selected, the system generates global addresses in accordance with
the retrieved prefix.
Valid only if the VLAN switch feature is enabled.
If theVLAN function is enabled, VLAN ID is needed to be configured.
Range: 1–4094. To ensure normal service operation, the VLAN ID must be
the same as that set in upper-layer OLT configuration.
seeFigure 3-4.
3-5
Chapter 3 Configure the Internet
IPv6 address. It is valid only if the IPv6
IPv6 address.
WAN
ZTE Proprietary and Confidential
connection.